Šta je ugljenični čelik

When no minimum levels are specified for any alloying element (eg, aluminum, chromium, nickel, molybdenum, vanadium, etc.) or any other element added to obtain the desired alloying effect, steel is generally considered to be carbon steel. Not more than 1.65% for manganese, not less than 0.40% or more than 0.60% for copper, and not more than 0.60% for silicon. The carbon content in carbon steel bars changes the properties of the steel, resulting in higher tensile strength. Depending on its carbon content, an increase in carbon increases the hardness and strength of carbon steel. Compared to other metals, mild steel can be bent, cut and twisted to easily create the desired shape. Hard carbon steel rods are typically used for blades or applications that require strength and hardness but not flexibility. For these reasons, carbon steel rods are ideal for many industrial products and applications where durability is critical. Carbon Steel Description: Carbon steel, also known as ordinary carbon steel, is a steel with carbon as the main interstitial alloy component. The American Iron and Steel Institute (AISI) defines carbon steel as: "If no minimum content of chromium, cobalt, molybdenum, nickel, niobium, titanium, tungsten, vanadium, or zirconium is specified or required, or any addition to obtain the desired alloying effect, Other elements; when the specified minimum content of copper does not exceed 0.40%; or the specified maximum content of any of the following elements does not exceed the stated percentage: manganese 1.65, silicon 0.60, copper 0.60." Carbon steel grades: Low carbon = 0.06% to 0.25% carbon content (low carbon steel) Medium Carbon = 0.25% to 0.55% carbon content (medium carbon steel) High carbon = >.55 posto do 1.00 posto sadržaj ugljika (tvrdi ugljični čelik) Upotreba ugljičnog čelika: Ugljični konstrukcijski čelik ima mnogo namjena i koristi se u velikoj količini. Pogodan je za opšte konstrukcije i inženjering, željeznice, mostove i razne građevinske projekte. Proizvod se može koristiti za zavarivanje i spajanje komponenti, a jedan se koristi u stanju isporuke. Status isporuke ugljeničnog čelika: Čelik se uglavnom isporučuje u toplo valjanom (uključujući kontrolisano valjanje) stanju, a može se isporučiti i u normalizovanom stanju prema zahtevima kupca i po obostranom dogovoru.